User manual

REMOTE CONTROL
45
Functionality
check
1. Set the Remote interface to USB, see page 26.
2. From the Windows Device Manager sure the
IVI driver recognizes the USB connection. The
GSP-9300 will be recognized as a USB Test and
Measurement device (IVI) when the connection
is successful.
If the connection is not recognized, reinstall the
IVI driver and set the interface to USB again.
To access the Device Manager in Windows 7:
Start>Control Panel>Hardware and Sound>Device
Manager
1
3. Start the NI Measurement and Automation
Explorer (MAX) program. Using Windows,
press:
Start>All Programs>National
Instruments>Measurement & Automation