User manual

REMOTE CONTROL
123
:DISPlay[:WINDow]:SPLit:NORMal:
ALTernate
Set
Description
Turns on the Alternate Sweep function for split
window mode, both windows are in the normal
trace mode.
(we also have Spectrogram and Topographic
mode)
Syntax
:DISPlay[:WINDow]:SPLit:NORMal:ALTernate
Example
:DISP:SPL:NORM:ALT
:DISPlay[:WINDow]:SPLit:NORMal:ACTive
Set
Description
Sets which window (upper or lower) to display the
normal trace mode in. It also becomes the active
window. This command will also put the screen
into split-screen mode if it is not already.
Syntax
:DISPlay[:WINDow]:SPLit:NORMal:ACTive
{UPPer|LOWer}
Example
:DISP:SPL:NORM:ACT UPP
:DISPlay[:WINDow]:SPLit:SPECtrogram
Set
Description
Sets the split screen mode to Spectrogram +
Spectrum.
Syntax
:DISPlay[:WINDow]:SPLit:SPECtrogram
Example
:DISP:SPL:SPEC
:DISPlay[:WINDow]:SPLit:TOPO
Set
Description
Sets the split screen mode to Topographic +
Spectrum.