User manual

REMOTE CONTROL
113
Query Syntax
:CALCulate:PMETer:LIMit:FAIL?
Return parameter
0
Pass, or limits are not on.
1
Fail
Example
:CALC:PMET:LIM:FAIL?
>1
:CALCulate:SEM:STATe
Set
Query
Description
Turns the SEM measurement on/off or queries its
state.
Syntax
:CALCulate:SEM:STATe {ON|OFF|1|0}
Query Syntax
:CALCulate:SEM:STATe?
Parameter
0
Turns SEM off.
1
Turns SEM on.
OFF
Turns SEM off.
ON
Turns SEM on.
Return parameter
0
SEM is off.
1
SEM is on.
Example
:CALC:SEM:STAT ON
:CALCulate:SEM:OFFSet<n>:RESult?
Query
Description
Returns the start, stop frequencies as well as the
pass/fail limits and judgements for the chosen
offset.
Query syntax
:CALCulate:SEM:OFFSet<n>:RESult?
Parameter
<n>
Offset number 1~5.
Return parameter
<start freq>
Start frequency of the selected channel
<low dBm>
Lower dBm measurement
<low p/f>
Lower pass/fail limit judgment.
0 = pass, 1 = fail.
<stop freq>
Stop frequency of the selected channel
<upp dBm>
Upper dBm measurement