Information

28
Pass/Fail Inspection Test performs the test result judgment with inspection criteria pre-defined
by user. The procedure is as follows: (a) Create Limit lines to set the inspection zone.
(b) Select the Pass Criterion. (c) Execute the Pass/Fail test.
limit line key
In addition to display the judgment result Pass or Fail on the LCD, an open-collector alarm
output is available at the rear panel, which allows user to connect an external alarm for
sound or other indications of test result.
Create limit line to set the
inspection zone
Execute the Pass/ Fail test
Pass/Fail result with
external alarm speaker
output to maximize
throughput
Limit Line & Pass/Fail Test