User manual
GSP-9300 Quick Start Guide
42
1. Press
System
>More[F7]>RmtInterface[F1]>
LAN[F2]>LAN Config[F1] to set the LAN
settings:
IP Address[F1]
Sets the IP address.
Subnet Mask[F2]
Sets the subnet mask.
Default
Gateway[F3]
Sets the default gateway.
DNS Server[F4]
Sets the DNS server address
LAN Config[F5]
Toggles the LAN
configuration between DHCP
and manual IP settings.
2. Press Apply[F6] to confirm the LAN
configuration settings.
Display Icon
The LXI icon turns green when connected
to a LAN and will flash if the
“Identification” setting is on, see page 44.
Set Password
The password on the LXI webpage can be set
from the spectrum analyzer. The password is
shown in the system information.
3. Press
System
>More[F7]>RmtInterface
Config[F1]>LAN[F2]>LXIPassword[F3] to set the
password.
4. Enter the password using the
F1~F7 keys, as shown below, or
use the numeric keypad to enter
numbers:
7 8 9
654
1 2 3
/0
Limitations:
No spaces
Only 1~9, A~Z, a~z characters allowed