User manual

GSP-9300 Quick Start Guide
46
SCPI Command
The SCPI Command page allows you to enter
SCPI commands directly from the browser for
full remote control. Please see the programming
manual for details. A password must be
entered before remote commands can be used.
Default password: lxiWNpwd
[Note: password is case sensitive.]
Get Image
The Get Image page allows the browser to
remotely capture a screenshot of the GSP-9300
display.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.