User manual

GSP-9300 Programming Manual
96
:CALCulate:LIMit:MODE
Set
Query
Description
Sets or queries the Pass/Fail mode for limit line
testing.
Syntax
:CALCulate:LIMit:MODE {SING|CONT}
Query Syntax
:CALCulate:LIMit:MODE?
Parameter
SING
Stops triggering after a pass/fail result.
CONT
Continues triggering after a pass/fail
result.
Return Parameter
SINGLE
Stops triggering after a pass/fail result.
CONTINUE
Continues triggering after a pass/fail
result.
Example
:CALC:LIM:MODE CONT
:CALCulate:LIMit:STATe
Set
Query
Description
Turns the limit line Pass/Fail test on/off.
Syntax
:CALCulate:LIMit:STATe {ON|OFF|1|0}
Query Syntax
:CALCulate:LIMit:STATe?
Parameter
0
Pass/Fail test is off.
1
Pass/Fail test is on.
OFF
Pass/Fail test is off.
ON
Pass/Fail test is on.
Return parameter
0
Pass/Fail test is off.
1
Pass/Fail test is on.
Example
:CALC:LIM:STAT 1
:CALCulate:LIMit<n>:TRACe
Set
Description
Creates a limit line from the currently selected
trace with a user defined offset.
Syntax
:CALCulate:LIMit<n>:TRACe <offset>