User manual

REMOTE CONTROL
95
:CALCulate:LIMit:LOW
Set
Description
Selects which limit line is used for the low limit.
Syntax
:CALCulate:LIMit:LOW <limit num>
Parameter
<limit
num>
<NR1> 1~5
Example
:CALC:LIM:LOW 2
:CALCulate:LIMit:HIGH
Set
Description
Selects which limit line is used for the high limit.
Syntax
:CALCulate:LIMit:HIGH <limit num>
Parameter
<limit
num>
<NR1> 1~5
Example
:CALC:LIM:HIGH 2
:CALCulate:LIMit<n>:MARKer
Set
Description
Sets the current marker position to a point on a
limit line. The vertical position of the point is the
marker’s vertical position + a user-defined offset.
Syntax
:CALCulate:LIMit<n>:MARKer <point>,<offset>
Parameter
<point>
<NR1> point 1~10
<offset>
<NR3> dB
<n>
Seleted limit line
Example
:CALC:LIM1:MARK 5, 20