User manual

GSP-9300 Programming Manual
76
Syntax
Query Syntax
*OPC
*OPC?
Return parameter
1
Returns 1 when all the outstanding
commands have completed.
*RST
Set
Description
*RST will perform a factory reset.
Syntax
*RST
*SRE
Set
Query
Description
Sets or queries the Service Request Enable register.
The Service Request Enable register determines
which registers of the Status Byte register are able
to generate service requests.
Syntax
*SRE <NR1>
Query Syntax
*SRE?
Parameter
<NR1>
0~255
Return parameter
<NR1>
Returns the bit sum of the Service Request
Enable register.
*STB?
Query
Description
Queries the bit sum of the Status Byte register with
MSS (Master summary Status).
Query Syntax
*STB?
Return parameter
<NR1>
Returns the bit sum of the Status Byte register
with the MSS bit (bit 6).
*TST?
Query
Description
Returns the result of a self-test. The GSP-9300 does
not support performing a selftest and thus will
always return “0” for this query.