User manual

GSP-9300 Programming Manual

[:SENSe]:OCBW:BANDwidth|BWIDth ....................... 165

[:SENSe]:OCBW:PERCent ............................................... 165

[:SENSe]:OCBW:SPACe ................................................... 166

[:SENSe]:P1DB:AVERage:COUNt ................................. 166

[:SENSe]:P1DB:GAIN:OFFSet ....................................... 166

[:SENSe]:PMETer:FREQuency ....................................... 167

[:SENSe]:PMETer:HLIMit ................................................ 167

[:SENSe]:PMETer:HOLD:STATe ................................... 167

[:SENSe]:PMETer:LLIMit ................................................ 168

[:SENSe]:PMETer:PSENsor:MODE .............................. 168

[:SENSe]:PMETer:RECording:TIME ............................. 168

[:SENSe]:PMETer:RECording:TIME:STEP .................. 169

[:SENSe]:POWer[:RF]:GAIN ........................................... 169

[:SENSe]:SEMask:BANDwidth|BWIDth:INTegration 170

[:SENSe]:SEMask:BANDwidth|BWIDth

[:RESolution] ....................................................................... 170

[:SENSe]:SEMask:BANDwidth|BWIDth

[:RESolution]:AUTO ......................................................... 170

[:SENSe]:SEMask:CARRier:AUTO ................................. 171

[:SENSe]:SEMask:CARRier:CPSD .................................. 171

[:SENSe]:SEMask:CARRier:POWer ................................ 172

[:SENSe]:SEMask:FREQuency:SPAN ............................ 172

[:SENSe]:SEMask:GWLan:MODulation ........................ 172

[:SENSe]:SEMask:HELP:STATe ..................................... 173

[:SENSe]:SEMask:NWLan:CHANnel:

BANDwidth|BWIDth ...................................................... 173