User manual

REMOTE CONTROL
47
7. Click on the I/O Settings tab.
8. Make sure the Enable Termination Character
check box is checked, and the terminal
character is \n (Value: xA).
9. Click Apply Changes.
8
7
9
10. Click on Input/Output.
11. Click on the Basic/IO tab.
12. Enter *IDN? in the Select or Enter Command drop
down box.
13. Click Query.
14. The *IDN? query will return the Manufacturer,
model name, serial number and firmware
version in the dialog box.
GWINSTEK,GSP9300,ENXXXXXX,TX.X.X.X