User manual

REMOTE CONTROL
223
Parameter/
Return parameter
<NRf>
Time value in seconds
Example
:TRIG:DEM:TIME:STOP 4.000e-2
:TRIGger[:SEQuence]:EXTernal:SLOPe
Set
Query
Description
Sets the external trigger slope
Syntax
:TRIGger[:SEQuence]:EXTernal:SLOPe
{POSitive|NEGative}
Query Syntax
:TRIGger[:SEQuence]:EXTernal:SLOPe?
Parameter/
Return parameter
POSitive
Positive slope
NEGative
Negative slope
Example
:TRIG:EXT:SLOP POS
:TRIGger[:SEQuence]:MODE
Set
Query
Description
Sets the triggering mode.
Syntax
:TRIGger[:SEQuence]:MODE
{NORMal|SINGle|CONTinuous}
Query Syntax
:TRIGger[:SEQuence]:MODE?
Parameter/
Return parameter
NORMal
Normal trigger mode
SINGle
Single trigger
CONTinuous
Continuous trigger
Example
:TRIG: MODE CONT
:TRIGger[:SEQuence]:PMETer:SOURce
Set
Query
Description
Sets the triggering source to immediate or external
Syntax
:TRIGger[:SEQuence]:PMETer:SOURce
{IMMediate|EXTernal}
Query Syntax
:TRIGger[:SEQuence]:PMETer:SOURce?