User manual

GSP-9300 Programming Manual
168
Parameter
0
Turn the Max/Min Hold function off.
1
Turn the Max/Min Hold function on.
OFF
Turn the Max/Min Hold function off.
ON
Turn the Max/Min Hold function on.
Return parameter
0
The Max/Min Hold function is off.
1
The Max/Min Hold function is on.
Example
:PEMT:HOLD:STAT 0
[:SENSe]:PMETer:LLIMit
Set
Query
Description
Sets or queries the power meter low limit for
pass/fail tests.
Syntax
[:SENSe]:PMETer:LLIMit <ampl>
Query Syntax
[:SENSe]:PMETer:LLIMit?
Parameter
<ampl>
<NRf> power unit, default = dBm
Return parameter
<NR3>
Unit = current unit.
Example
:PMET:LLIM 0
[:SENSe]:PMETer:PSENsor:MODE
Set
Query
Description
Sets or queries the power meter sensor mode.
Syntax
[:SENSe]:PMETer:PSENsor:MODE
{LOWNoise|FASTer}
Query Syntax
[:SENSe]:PMETer:PSENsor:MODE?
Parameter/
Return parameter
LOWNoise
Sets the power meter mode to low noise.
FASTer
Set the power meter mode to fast.
Example
:PMET:PSEN:MODE
[:SENSe]:PMETer:RECording:TIME
Set
Query
Description
Sets or queries the power meter recording time.