User manual

GSP-9300 Programming Manual
136
:MMEMory:DELete
Set
Description
Deletes the designated file from the current
directory.
Syntax
:MMEMory:DELete <src_file_name>
Parameter
<src_file_name>
Example
:MMEM:DEL QuickJpg1.jpg
:MMEMory:DESTination
Set
Description
Sets the destination directory for memory related
commands.
When you use a single USB drive/SD card with
multiple partitions inside, the system will
automatically name these partitions in the numeric
order, so you need to specify the partition number.
The same situation applies when you use a USB
hub to extend the number of USB ports. When a
hub is used, all the partitions from all the attached
devices are numbered in numerical order from the
first port to the last port.
If a partition number is not supplied, the system
will default to partition #1. For example:
:MMEM:DEST USB0 = :MMEM:DEST USB)
Syntax
:MMEMory:DESTination {LOCAL|USB[<n>]|SD[<n>]}
Parameter
LOCAL
USB<n>
<NR1>
SD<n>
<NR1>
Example
:MMEM:DEST SD