User manual

REMOTE CONTROL
131
INITiate Commands
:INITiate:CONTinuous ..................................................... 131
:INITiate[:IMMediate] ........................................................ 131
:INITiate:CONTinuous
Set
Query
Description
Sets the sweep mode to continuous or single mode
or queries its state.
Syntax
:INITiate:CONTinuous {OFF|ON|0|1}
Query Syntax
:INITiate:CONTinuous?
Parameter
0
single
1
continuos
OFF
single
ON
continuos
Return parameter
0
single
1
continuos
Example
:INIT:CONT ON
:INITiate[:IMMediate]
Set
Description
Initiates an immediate single sweep then stops the
sweep.
Syntax
:INITiate[:IMMediate]
Example
:INIT