User manual

REMOTE CONTROL
107
:CALCulate:MATH:LDIF
Set
Description
Calculates the logarithmic difference between two
traces (T1 – the first trace operand and T2 – the
second trace operand) and assigns the designated
reference level to the destination trace.
Syntax
:CALCulate:MATH:LDIF
<Destination Trace,T1,T2, Ref>
Parameter
< Destination Trace>*
TRACe1, TRACe2, TRACe3
or TRACe4
< T1>
< T2>
<Ref>
<NR1>Reference level
Note
* The destination trace cannot be the same the T1 or
T2 traces.
Example
:CALC:MATH:LDIF TRAC1,TRAC2,TRAC3,20
:CALCulate:MATH:LOFF
Set
Description
Adds an offset to T1 -the source trace- and puts the
result into a destination trace.
Syntax
:CALCulate:MATH:LOFF <Destination Trace,T1,offset>
Parameter
< Destination Trace >*
TRACe1, TRACe2, TRACe3
or TRACe4
< T1> -source trace-
<offset>
<NRf>Offset in dB
Note
* The destination trace cannot be the same as the
source trace.
Example
:CALC:MATH:LOFF TRAC1,TRAC2,6
:CALCulate:NDB:STATe
Set
Query
Description
Sets or queries the state of the NdB BW function.
Syntax
:CALCulate:NDB:STATe {ON|OFF|1|0}