Datasheet

GSP-818
GSP-818
Simply Reliable
Frequency Range: 9kHz ~ 1.8GHz
RBW: 10Hz ~ 3MHz, 10Hz ~ 500kHz in
1-10 steps
Sensitivity:-148dBm/Hz Typical@PreAmp On
Built-in AM/FM Demodulation
Bandwidth Zoom Function
Measurement Function: ACPR/OCBW/
CHPW, NdB Bandwidth, Freq. Counter,
Noise Marker
Built-in 20dB Preamplifier Standard
Interface: Lan, USB
Screen: 10.4" SVGA Output (800x600)
Options: Tracking Generator, EMI Filter &
Detector (via software keycode)
LAN SVGA
1.8 GHz
GSP-818 is a new basic spectrum analyzer, which supports a frequency range of 1.8 GHz
and provides testing requirements for RF products during the development/production
phases. GSP-818 has a built-in 20dB amplifier and provides an adjustable range of
resolution bandwidth (RBW) from 10Hz to 3MHz. In addition, it has the AM/FM signal
demodulation function and the ACPR/OCBW/CHPW test function to meet the
requirements of general RF signal measurement.
To achieve clearer signal observation, GSP-818 utilizes a 10.4” large screen with SVGA
(800 x 600) resolution. Pertaining to the communications interface, GSP-818 provides
both USB and LAN interfaces. Via the USB Host, users can quickly retrieve the files
saved after measurements. The USB Device and LAN interface allow users to control
through the dedicated PC software or to use the required program designed by the
corresponding commands.
GSP-818 also offers two options: Tracking Generator and EMI Filter & Detector. It is
different from the previous models. If customers require options, there is no need
to send the equipment back. Customers only need to purchase the corresponding
software license (Software Keycode) to activate the purchased option, which greatly
improves the operational efficiency.
Checking and Analysis of Spectrum
Characteristics
Analyze AM and FM Signal
Characteristics
Monitor the Signal Uploaded by SNG
Vehicle
For a Compact Test System
Measuring the Frequency Response of RF
Cables, Attenuators, Filters and Amplifiers
SPECTRUM ANALYZER
FEATURES
Rear Panel
Front
APPLICATIONS