User manual
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright
2014
by Conrad Electronic SE.
V1_0714_02-JH
Cleaning
Turn off the device and disconnect it from the mains.
Always observe the following safety instructions before cleaning the device:
If you open covers or remove parts – unless you can do this by hand – live parts
may be exposed.
Do not use abrasive, chemical or aggressive cleaning agents such as benzene, alcohol etc.
These might attack the surface of the device. Furthermore, the fumes are hazardous to your
health and are explosive. Moreover, you should not use sharp-edged tools, screwdrivers or
metal brushes or such like for cleaning.
Use a clean, lint-free, antistatic and slightly damp cloth for cleaning the device.
Disposal
Electrical and electronic products do not belong to the household waste.
Dispose of an unserviceable product in accordance with the relevant statutory
regulations.
You thereby full your statutory obligations and contribute to the protection of the environment!