User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- Menu Tree
- Test Lead Connection
- ACW, DCW and GB Manual Testing
- Choose/Recall a Manual Test Number
- Edit Manual Test Settings
- Setting the Test Function
- Setting the Test Voltage or Test Current
- Setting the Test Frequency
- Setting the Upper and Lower Limits
- Setting a Reference Value
- Setting the Test Time (Timer)
- Setting the Ramp Up Time
- Creating a MANU Test File Name
- Setting the ARC Mode
- Setting PASS HOLD
- Setting FAIL MODE
- Setting MAX HOLD
- Setting the Grounding Mode
- Saving and Exiting EDIT Status
- Running a MANU Test
- PASS / FAIL MANU Test
- Zeroing of the Test Leads (GB only)
- Special MANU Test Mode (000)
- Automatic Tests
- Common Utility Settings
- EXTERNAL CONTROL
- REMOTE CONTROL
- FAQ
- APPENDIX
- INDEX
GPT-9000 Series User Manual
148
Auto Commands
AUTO<x>:PAGE:SHOW ......................................................................... 149
AUTO:PAGE:MOVE ................................................................................. 149
AUTO:PAGE:SWAP ................................................................................. 150
AUTO:PAGE:SKIP .................................................................................... 150
AUTO:PAGE:DEL ..................................................................................... 151
AUTO:NAME ............................................................................................. 151
AUTO:EDIT:ADD ...................................................................................... 152
TESTok:RETurn ......................................................................................... 152
AUTO:STEP
Set
Query
Description
Sets or queries the AUTO number (automatic test
number).
Syntax
Query Syntax
AUTO:STEP <NR1>
AUTO:STEP?
Parameter/
Return parameter
<NR1>
1~100.
Example
AUTO:STEP 100
Sets the current AUTO number to 100.