User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- Menu Tree
- Test Lead Connection
- ACW, DCW and GB Manual Testing
- Choose/Recall a Manual Test Number
- Edit Manual Test Settings
- Setting the Test Function
- Setting the Test Voltage or Test Current
- Setting the Test Frequency
- Setting the Upper and Lower Limits
- Setting a Reference Value
- Setting the Test Time (Timer)
- Setting the Ramp Up Time
- Creating a MANU Test File Name
- Setting the ARC Mode
- Setting PASS HOLD
- Setting FAIL MODE
- Setting MAX HOLD
- Setting the Grounding Mode
- Saving and Exiting EDIT Status
- Running a MANU Test
- PASS / FAIL MANU Test
- Zeroing of the Test Leads (GB only)
- Special MANU Test Mode (000)
- Automatic Tests
- Common Utility Settings
- EXTERNAL CONTROL
- REMOTE CONTROL
- FAQ
- APPENDIX
- INDEX
REMOTE CONTROL
147
Parameter/
Return parameter
<NR1>
Description
0
Turn all lines off/all lines are off.
1
Displays the graph line for the primary
test item. See page 75 for details.
For example: V for ACW, DCW and GB
tests, I for IR tests.
2
Displays the graph line for the secondary
test items.
For example: I for ACW and DCW tests,
R for IR and GB tests.
3
Turn all lines on/all lines are on.
Example
SWEEP:GRAP:LINE 3
Turns all the graph lines on.
SWEEP:STARt:TIME
Set
Query
Description
Sets or returns the start time (STA.t) of the sweep
graph in milliseconds.
This setting will also set what the time for first
point will be for the sweep data that is returned in
the SWEEP:DATA:SHOW query.
Syntax
Query Syntax
SWEEP:STARt:TIME <NR2>
MANU:RTIMe?
Parameter/
Return parameter
<NR2>
0.1~1999.8 milliseconds
Example
SWEEP:STARt:TIME 100.0
Sets the sweep start time to 1 second.