User Manual

OPERATION

4. To stop the test when HOLD is

displayed on-screen, press the

STOP button.

STOP

Note

When in HOLD status, only the START and STOP

buttons can be pressed, all other keys are disabled.

Stop a Running

Test

1. To stop the AUTO test at any time

when it is running, press the STOP

button. The AUTO test will stop

immediately. When the STOP

button is pressed, a judgment is

not made on the current test and

any remaining tests are aborted.

All panel keys except the STOP

and START buttons are locked

when the tester has been stopped.

All the results up until when the

AUTO test was stopped are shown

on-screen. See page 94 for more

details on automatic test results.

STOP

E MA U OT N A_ *A U T O = 0 0 1 - * *

# 0 1 : F A I # 0 2 : P A S # 0 3 : S T O # 0 4 : - - -

# 0 5 : - - - # 0 6 : - - - # 0 7 : - - - # 0 8 : - - -

# 0 9 : # 1 0 : # 1 1 : # 1 2 :

# 1 3 : # 1 4 : # 1 5 : # 1 6 :

Example of an automatic test that has been

stopped. Dashes (-) indicate aborted test steps.

2. To put the tester back into READY

status, press the STOP button

again.

STOP