User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- Menu Tree
- Test Lead Connection
- Manual Testing
- Choose/Recall a Manual Test Number
- Edit Manual Test Settings
- Setting the Test Function
- Setting the Test Voltage or Test Current
- Setting the Test Frequency
- Setting the Upper and Lower Limits
- Setting a Reference Value
- Setting the Test Time (Timer)
- Setting the Ramp Up Time
- Creating a MANU Test File Name
- Setting the ARC Mode
- Setting PASS HOLD
- Setting FAIL HOLD
- Setting MAX HOLD
- Setting the Grounding Mode
- Saving and Exiting EDIT Status
- Running a MANU Test
- PASS / FAIL MANU Test
- Zeroing of the Test Leads (GB only)
- Special MANU Test Mode (000)
- Common Utility Settings
- Automatic Tests
- EXTERNAL CONTROL
- REMOTE CONTROL
- FAQ
- APPENDIX
- INDEX
REMOTE CONTROL
137
Auto Commands
AUTO<x>:PAGE:SHOW.......................................................................138
AUTO:PAGE:MOVE ..............................................................................138
AUTO:PAGE:SWAP ..............................................................................139
AUTO:PAGE:SKIP .................................................................................139
AUTO:PAGE:DEL ..................................................................................140
AUTO:NAME .........................................................................................140
AUTO:EDIT:ADD ..................................................................................141
TESTok:RETurn ......................................................................................141
AUTO:STEP
Set
Query
Description
Sets or queries the AUTO number (automatic test
number).
Syntax
Query Syntax
AUTO:STEP <NR1>
AUTO:STEP?
Parameter/
Return parameter
<NR1>
1~100.
Example
AUTO:STEP 100
Sets the current AUTO number to 100.