User manual

Table Of Contents

APPENDIX

Error Messages

Test Errors

The following error messages or messages may appear on the GPT-9600

screen when configuring or running tests.

Error Messages

Description

I ERR

For ACW, DCW tests. Shown when the current

is set too high.

SHORT

Voltage is too low. Indicates that the DUT

could be shorted.

V ERR

For ACW, DCW and IR tests. Indicates that the

voltage is too high.

R ERR

For IR tests. Resistance=0Ω. Check to see

whether the DUT or test lead is shorting.

TIME ERR

For ACW tests. TIME ERR is displayed when

the H setting is ≥15~20mA if the TIME setting

is OFF.

OVER 25W

For DCW tests. OVER 25W is displayed if the H

setting multiplied by the voltage setting is

greater than 25W.