User manual

OPERATION
53
3. The PASS judgment will be held on the display
until the STOP or START button is pressed.
Pressing the STOP button will
return the tester to the READY
status.
STOP
Pressing the START button will
restart the tests again.
START
FAIL Judgment
4. After both tests have finished, if
any or both of the tests are judged
as FAIL, the output will be cut
from the terminals, FAIL will be
displayed on the screen, the buzzer
will sound and the FAIL indicator
will be lit red.
FAIL
1 00
k V
IAF
L
Am
23 0
H = 2 2 . 0 m A
R
m AL 0= 0 0. 6 0 S = 0T
CWDA CW R I -C IA T M EI
Note
If both tests fail, then the last test will be shown on
the display.
5. The FAIL judgment will be held on
the display until the STOP button
is pressed.
Pressing the STOP button will turn
the buzzer sound off and allow
you to view the test results.
STOP