User manual

OPERATION
45
PASS / FAIL Test Judgments
Background
If the test is allowed to run to completion (the
test is not stopped or a protection setting is not
tripped) then the tester will judge the test as
either PASS or FAIL.
Note
The test will be judged PASS when:
 The H and L limits (high and low limits)
have not been tripped during the test time.
The test will be judged FAIL when:
 Either the H or L limit has been tripped
during the test time.
 The ARC current limit has been tripped
during a test (if enabled).
PASS Judgment
1. When the test is judged as PASS,
PASS will be displayed, the buzzer
will sound once and the PASS
indicator will be lit green.
PASS
H = 2 2 . 0 m A m AL 0= 0 0. 6 0 S = 0T
C WDA CW R I DO EM T M EI
1 00 0 90
k V
SAP S
Am
2. The PASS judgment will be held on the display
until the STOP or START button is pressed.
Pressing the STOP button will
return the tester to the READY
status.
STOP