User manual

GPT-9600 Series User Manual
44
Example
H = 2 2 . 0 m A m AL 0= 0 0. 0 8 S = 0T
CWDA CW R I DO EM T M EI
TEST Status
Measured current
TEST voltage
Remaining test time
0 94
k V
SET T
Am
9 00
Stop the Test
9. To stop the test at any time when it
is running, press the STOP button.
The test will stop immediately.
When the STOP button is pressed,
a judgment is not made on the test.
All panel keys except the STOP
button are locked when the tester
is in STOP status.
STOP
Example
H = 2 2 . 0 m A m AL 0= 0 0. 0 8 S = 0T
CWDA CW R I DO EM T M EI
STOP Status
0 94
k V
OTS P
Am
9 00
10. To put the tester back into READY
status, press the STOP button
again.
STOP
Note
Do not touch any terminals, test leads or any other
connections when the test is on.