User manual

GPT-9600 Series User Manual
38
Note
*Note that the T value cannot be edited with the
scroll wheel if it is set to OFF. See below to toggle
the test time on or off.
When the output current exceeds 15mA, AC
withstanding tests cannot be continuously
performed without a cool down period between
tests. For 15mA≤I≤20mA, the cool down period
must equal or exceed the test time. See the AC
Withstanding specifications on page 71 for details.
Turning the test
time off.
The test time (T setting) can be turned on or off.
When turned off, a test will run indefinitely
until the test has failed or is stopped by the
user.
Press the TIME soft-key to toggle
the test time (T setting) on or off.
I M ET