User manual

OPERATION
27
TEST status
TEST status is active when a test is running.
Pressing STOP will cancel the test and put the
tester into the STOP status. Waiting for the test
to complete will result in a PASS or FAIL
judgment.
0 14
k V
SET T
Am
0 00
H = 2 2 . 0 m A m AL 0= 0 0. 0 8 S = 0T
CWDA CW R I DO EM T M EI
TEST Status
STOP status
STOP status is shown when a test did not finish
running and has been stopped by the operator.
Pressing STOP will return the tester to READY
status.
H = 2 2 . 0 m A m AL 0= 0 0. 0 8 S = 0T
CWDA CW R I DO EM T M EI
STOP Status
0 14
k V
OTS P
Am
0 00
FAIL status
When a DUT fails a test, the FAIL status is
displayed. Pressing STOP twice will return the
tester to the READY status.
H = 2 2 . 0 m A m AL 0= 0 0. 6 0 S = 0T
C WDA CW R I DO EM T M EI
FAIL Status
1 00
k V
IAF L
Am
23 0