Instructions

GPM-8310 User Manual
40
Setting up data update rate
Steps
1. Press Setup button.
2. Press Enter button.
3. Press down arrow key to move
cursor to the Data Update Rate field.
4. Use soft keys to select and confirm
the desired option. Press the
“More” soft keys to toggle among
pages for further options.
Option
0.1s/0.25s/
0.5s/1s/2s/
5s/10s/20s
Measured value is updated in
accordance with the designated time
interval. The Update 5s status icon, for
example, on the display lights up in
green when 5s option is selected.
Auto
Data is only updated when a set
period (Time Out) of the input
waveform is detected.
Default value
0.25s
Steps
5. When Auto is selected, press right
arrow key to move cursor to Time
Out field.