Instructions

GPM-8310 User Manual
24
Warning
 Do not use damaged device. Before using the
equipment, check its housing first to sure there is
no any cracks. Do not operate this device in an
environment containing explosive gases, steam or
dust.
 The maximum measurable current and voltage are
600 V and 20A for voltage and current terminals of
the rear panel of the GPM-8310. Do not input
exceeded voltage and current, otherwise it will burn
the device.
 The maximum input voltage are 10 V and 2V for
EXT1 and EX2 terminals of the rear panel of the
GPM-8310. Do not input exceeded voltage,
otherwise it will burn the device.
 Always use the supplied cable for connection.
 Before connecting the device, observe all the safety
symbols marked on the device.
 Turn off the power to the device and the application
system before connecting I/O terminals.
 Do not install replacement parts on the device or
perform any unauthorized modifications.
 Do not use this device if the removable cover is
removed or loosened.
 Do not connect any cables and terminals before
performing self-test.
 Use only the power adapter supplied by the
manufacturer to avoid accidental injury.
 Do not use this device for life support systems or
any other equipment that has safety requirements.