Instructions

GPM-8310 User Manual
220
Note
• Set how each bit in the condition register must
change to trigger the setting of an event.
• For information about the condition register, see
Appendix,"Status system" at page 239.
:STATus:QENable
Description
Sets or returns whether messages other than errors
will be stored to the error queue (ON) or not
(OFF).
Syntax
:STATus:QENable {<Boolean>|OFF|ON}
Query Syntax
:STATus:QENable?
Parameter
<Boolean>0
OFF
<Boolean>1
ON
Return parameter
0
Function is off.
1
Function is on.
Example
:STATUS:QENABLE ON
:STATUS:QENABLE?
-> :STATUS:QENABLE 1
:STATus:QMESsage
Description
Sets or returns whether message information will
be attached to the response to the STATus:ERRor?
query (ON/OFF).
Syntax
:STATus:QMESsage {<Boolean>|OFF|ON}
Query Syntax
:STATus:QMESsage?
Parameter
<Boolean>0
OFF
<Boolean>1
ON
Return parameter
0
Function is off.
1
Function is on.
Set
Query
Set
Query