Instructions

COMMAND OVERVIEW
181
[:INPut]:CURRent:EXTSensor:CONFig<x>
Description
Sets or returns the valid external current sensor
range.
Syntax
[:INPut]:CURRent:EXTSensor:CONFig<x>
{ALL|<Voltage>[,Voltage]…}
Query Syntax
[:INPut]:CURRent:EXTSensor:CONFig<x>?
Parameter/
Return parameter
<x>
1,2(EXT1,EXT2), If <x> is omitted, by
default sets or returns EXT2 config.
ALL
All ranges are valid.
<Voltage>
See(:INPut:CURRent:RANGe).
Example
:INPUT:CURRENT:EXTSENSOR:CONFIG1 2,0.5,0.1
:INPUT:CURRENT:EXTSENSOR:CONFIG1?
->:INPUT:CURRENT:EXTSENSOR:CONFIG1
2.00E+00,500.0E-03,100.0E-03
[:INPut]:CURRent:EXTSensor:POJump<x>
Description
Sets or returns the jump destination range that is
used when a current peak over-range occurs.
Syntax
[:INPut]:CURRent:EXTSensor:POJump<x>
{OFF|<Voltage>}
Query Syntax
[:INPut]:CURRent:EXTSensor:POJump<x>?
Parameter/
Return parameter
<x>
1,2(EXT1,EXT2), If <x> is omitted, by
default sets or returns EXT2 config.
OFF
No jump destination current range.
<Voltage>
See(:INPut:CURRent:RANGe).
Example
:INPUT:CURRENT:EXTSENSOR:POJUMP1 2V
:INPUT:CURRENT:EXTSENSOR:POJUMP1?
->:INPUT:CURRENT:EXTSENSOR:POJUMP1 2.00E+00
Set
Query
Set
Query