Instructions

REMOTE CONTROL
137
Configure Remote Control Interface
Configure USB Interface
USB CDC Class
Due to the USB port configured to CDC
(Communications Device Class) by default, the
GPM-8310 will appear as a virtual COM port to a
connected PC. Before, hence, using remote control
via CDC USB class, install the appropriate CDC
USB driver included on the User Manual CD.
Background
Continue the following setting from SYSTEM
CONFIG setting screen
Steps
1. Press Enter button.
2. Press down arrow key to move
cursor to I/O Model field.
3. Use soft keys to select and confirm
the USB option.
USB
Configuration
PC connector
Type A, host
GPM-8310 connector
Rear panel Type B, slave
Speed
1.1/2.0 (full speed/high
speed)
USB Class
CDC (Communications
device class)
Hardware flow control
Off
Data Bits
8
Stop bit
1