Instructions

GPM-8310 User Manual
134
4094 Mode
Overview
It is the mode for IO expansion via converting serial
data into parallel data. Up to 8 pins are available
simultaneously when single 4094 is in operation,
whereas it rises to the maximum of 16 pins available
simultaneously if putting two 4094 in series. Refer to
the following introductions along with diagrams for
more details. Please see the digital I/O commands on
page 160 for full usage details.
Related
Commands
AOUT:DIG:MODE 4094 (switch to 4094 mode)
4094 x 1(8 Pin)
AOUT:DIG:OUTP 10，1
=> 4094 Output(Out1~Out8) : 01010000
4094 x 2(16 Pin)
AOUT:DIG:OUTP 22,0
AOUT:DIG:OUTP 88,1
=> 4094 Output(Out1~Out8) : 01101000
(Out9~Out16): 00011010
Note:
0=> output is Low (+0V)
1=> output is High (+5V)