Instructions

DIGITAL I/O / DA4
133
User Mode - Switch Mode (Relay)
Overview
It is the mode driving Relay to control external circuit
with up to 4 pins available for use simultaneously.
Refer to the following introductions along with
diagrams for more details. Please see the digital I/O
commands on page 160 for full usage details.
Related
Commands
AOUT:DIG:MODE IO (switch to IO mode)
AOUT:DIG:SET 1,0,1,0
=> OUT1(Pin18) : RELAY ON
OUT2(Pin6) : RELAY OFF
OUT3(Pin19) : RELAY ON
OUT4(Pin7) : RELAY OFF
Pin Diagram
Use the built-in power supply which provides the
power of maximum 100mA
Use the external power (+5~24V) (Maximum Ids of
each channel: 100mA)