User manual

REMOTE CONTROL
39
Command List • Detailed descriptions of each command start from the next page. • The “HELP” command shows all the below commands and their
meanings, except for the HELP command itself.
ISET<X>:<NR2>
Sets the output current.
ISET<X>?
Returns the output current setting.
VSET<X>:<NR2>
Sets the output voltage.
VSET<X>?
Returns the output voltage setting.
IOUT<X>?
Returns the actual output current.
VOUT<X>?
Returns the actual output voltage.
TRACK<NR1>
Selects the operation mode.
BEEP<BOOLEAN>
Turn on or off the beep.
OUT<BOOLEAN>
Turn on or off the output.
STATUS?
Returns the GPS-3303D or GPS-3303S status.
*IDN?
Returns the GPS-3303D or GPD-3303S identification.
RCL<NR1>
Recalls a panel setting.
SAV<NR1>
Saves the panel setting.
HELP?
Shows the command list.
ERR?
Returns the instrument error messages.
GPD-3303 Series User Manual
40 Command Details ISET<X>:<NR2> Description
Sets the output current.
Panel operation
See page23
Response time
Minimum 70ms
Example ISET1:2.234
ISET1:2.23
Sets the CH1 output current to 2.234A (for GPD-3303S) Sets the CH1 output current to 2.23A (for GPD-3303D)
ISET<X>? Description
Returns the output current setting.
Panel operation
See page23
Response time
Minimum 80ms
Example ISET1?
Returns the CH1 output current setting
VSET<X>:<NR2> Description
Sets the output voltage.
Panel operation
See page23
Response time
Minimum 70ms
Example VSET1:20.345
VSET1:20.3
Sets the CH1 voltage to 20.345V (for GPD-3303S) Sets the CH1 voltage to 20.3V (for GPD-3303D)