User Manual

MEASUREMENT
33
Select Measuring Signal (Drive)
Background
Resistance measurement has 5 different measuring signals
that can be applied to obtain a resistance measurement:
DC+, DC-, Pulse, PWM, Zero.
Note
The Dive function is only applicable to the GOM-805.
The drive signal for the GOM-804 is fixed to DC+.
The Drive function cannot be used with the Scan or
Diode functions. In addition, the “Zero” drive setting is
only available with the Ohm measurement function.
1. Select Drive
Press the
Drive
key and use the up and down arrow
keys to select a drive signal.
Drive mode
Drive selection
indicator
Set drive signal
Drive Range
DC+, DC-, Pulse, PWM, Zero