User Manual

HANDLER/SCAN INTERFACE
97
Start>All Programs>National
Instruments>Measurement & Automation
Step a.
From the Configuration panel access;
My System>Devices and Interfaces>GPIB0
Step b.
Press the Scan for Instruments button.
Step c.
In the Connected Instruments panel the GOM-804/805
should be detected as Instrument 0 with the address the
same as that configured on the unit.
Step d.
Double click the Instrument 0 icon.
a
b
c
d
Step e.
Click on the Attributes tab at the bottom.
Step f.
Click on Communicate with Instrument.