User Manual

HANDLER/SCAN INTERFACE

Install USB Driver

Background

The USB driver needs to be installed when using the USB

port for remote control. The USB interface creates a

virtual COM port when connected to a PC.

1. Select the USB

driver.

Configure the interface to USB in

System>Utility>Interface menu.

Page 71

Connect the Type A-B USB cable to the

rear panel USB B port on the

GOM-804/805. Connect the other end to

the Type A port on the PC.

Go to the Windows Device Manager.

For Windows 7 go to:

Start Menu > Control Panel > Hardware and Sound >

Device Manager

The GOM-804/805 will appear as an unknown Virtual

Com Port under “Other Devices”.

Right-click Other Devices and select “Update Driver

Software”.

Select “Browse my computer for driver software” and

select the driver on the User Manual CD.

The GOM-805 and the COM port that it is assigned to

will now appear in under the Ports (COM & LPT) node.