User Manual

MEASUREMENT

Compare function

indicator

Measured value as a

percentage of the

reference value

Measured value

Reference, limits, compare

mode and beep mode

Pass/Fail judgment

A measured value that falls within the upper and lower

limits is considered IN (pass), a value that falls below the

lower limits is considered LO, and a value that falls over

the upper limit is a HI.

Reference

value

Upper

limit

Lower

limit

IN HILO

For all the compare modes, IN, HI or LO will be shown

on the display for each judgment.

1. Select the

compare function

Press

Compare

to access the compare mode, as shown

above.

2. Select the

compare mode

Use the arrow keys to navigate to the Mode setting. Press

the Enter key to toggle the compare mode.

Mode

Move

Toggle

Enter

Range

Abs,△ %, %