User Manual

MEASUREMENT

Compare Function

Background

The compare function compares a measured value to a

“Reference” value that has an upper (HI) and lower (LO)

limit. If the measured value is within the upper and lower

limit, then the measured value is judged as IN.

There are three compare modes that can be used to make

a judgment: ABS, △% and % modes.

The ABS mode displays the absolute difference between

the measured and the reference value (shown as △) and

compares the measured value to the upper (HI) and

lower (LO) limit. The upper and lower limits are set as

absolute resistance values.

Compare function

indicator

Absolute

difference of

measured value

from Reference

value

Measured value

Reference, limits, compare

mode and beep mode

Pass/Fail

judgment

A measured value that falls within the upper and lower

limits is considered IN (pass), a value that falls below the

lower limits is considered LO, and a value that falls over

the upper limit is a HI.

Reference

value

Upper

limit

Lower

limit

IN HILO

[Note that the reference value in the ABS mode is only

for reference purposes and is not used to make a

judgment.]