User Manual

COMMAND OVERVIEW
113
Calculate Commands
CALCulate:COMPare:BEEPer
Set
Query
Description
Sets or returns the compare function beeper mode.
Syntax
Query Syntax
CALCulate:COMPare:BEEPer {OFF|PASS|FAIL}
CALCulate:COMPare:BEEPer?
Parameter/
Return parameter
OFF
Turns the beeper off.
PASS
The beeper will sound on a pass test
result.
FAIL
The beeper will sound on a fail test
result.
Example
CALC:COMP:BEEP FAIL
Sets the beeper on when the test result is a fail.
CALCulate:COMPare:LIMit:LOWer
Set
Query
Description
Sets or returns the lower limit value for the compare
function.
Syntax
Query Syntax
CALCulate:COMPare:LIMit:LOWer {<NRf>[,<String>]}
CALCulate:COMPare:LIMit:LOWer?
Parameter
<NRf>
000.0000~999.9999
<String>
mohm/ohm/kohm/maohm,unit
If the unit is not set, the unit will be
automatically set by the present range.
Return parameter
<NR3>
000.0000~999.9999E±X
Example
CALC:COMP:LIM:LOW 0.123,maohm
Sets the lower limit value to 0.123MΩ.
CALC:COMP:LIM:LOW?
>0.1230E+6
Returns the lower limit as 0.123MΩ.