User Manual

COMMAND DETAILS

Example :MEASure:SOURce1 CH 1

:MEASure:SOURce2 CH 2

:MEASure:PHAse?

4.50E+01

Select channel 1 and 2 as phase source1/2, and

then measure the phase in degrees.

Reference Commands

:REF<x>:DISPlay ..........................................................61

:REF<x>:TIMebase:POSition ...................................... 62

:REF<x>:TIMebase:SCALe .......................................... 62

:REF<x>:OFFSet .......................................................... 63

:REF<x>:SCALe ........................................................... 63

:REF<x>:DISPlay

Set

Query

Description

Sets or queries a reference waveform to be shown

on the display.

Syntax :REF<x>:DISPlay {OFF| ON| ?}

Parameter <x>

Reference number

1,2,3,4

REF1~REF4

OFF

Turns the selected reference

waveform off

Turns the selected reference

waveform on

Return parameter

Returns the status of the selected reference

waveform. (OFF, ON)

Example :REF1:DISPlay ON

Turns on reference1 (REF 1) on the display.