User Manual

COMMAND DETAILS
45
:DISPlay:WAVEform
Set
Query
Description
Sets or queries whether the waveforms are drawn
as vectors or dots.
Syntax :DISPlay:WAVEform {VECTor | DOT | ?}
Parameter VECTor Vectors
DOT Dots
Return parameter Returns VECT or DOT.
Example :DISPlay:WAVEform VECTor
Sets the waveform to vectors.
Hardcopy Commands
:HARDcopy:START ..................................................... 45
:HARDcopy:MODe ..................................................... 45
:HARDcopy:PRINTINKSaver ...................................... 46
:HARDcopy:SAVEINKSaver ........................................ 46
:HARDcopy:SAVEFORMat ......................................... 46
:HARDcopy:START
Set
Description
Hardcopy start is the equivalent of pressing the
Print key on the front panel.
Syntax :HARDcopy:START
:HARDcopy:MODe
Set
Query
Description
Sets or queries whether hardcopy is set to print or
save.
Syntax :HARDcopy:MODe {PRINT|SAVE|?}
Parameter PRINT Print mode SAVE
Save mode
Return parameter Returns the mode .(PRINT/SAVE)