User Manual

COMMAND DETAILS
39
Example :CURSor:V2Position 1.1E-1
Sets the V2 cursor position to 110mA.
:CURSor:VDELta
Query
Description
Returns the delta of V1 and V2.
Syntax :CURSor:VDELta {?}
Return Parameter <NR3> Returns the difference between two
vertical cursors as <NR3>.
Example :CURSor:VDELta?
4.00E+0
Returns the vertical delta as 4 volts.
:CURSor:XY:RECTangular:X:POSition<x>
Set
Query
Description
Sets or queries the horizontal position in XY mode
for the x rectangular coordinates for cursor 1 or 2.
Syntax :CURSor:XY:RECTangular:X:POSition<x> {NRf|?}
Parameter <x> Cursor <NRf>
Position
1, 2 Horizontal co-
ordinates
Return parameter Returns the cursor position.
Example :CURSor:XY:RECTangular:X:POSition1 4.0E-3
Sets the X-coordinate cursor 1 position to
40mV/mA.
:CURSor:XY:RECTangular:X:DELta
Query
Description
Returns the delta value of cursor 1 and 2 on the X
coordinate.
Syntax :CURSor:XY:RECTangular:X:DELta {?}