User Manual

ManualsBrandsGW INSTEK ManualsLaboratory Test EquipmentDigital 150 MHz 4-channel 5 null 25 null 8 Bit Digital storage (DSO)

MEASUREMENT

93

Start Go-NoGo

Press Enable to start the Go-NoGo test.

The Enable button will change to

Disable. Pressing Disable will stop the

Go-NoGo test and toggle the button

back to Enable.

Exit the

Application

To exit the application, press Break.

Using the Go-

NoGo Output

To output the Go-NoGo results to an

external device, the Go-NoGo rear

panel terminal (open collector) can be

used. The Go-NoGo terminal will

output a 5Vpp a positive pulse each

time a NoGo violation has occurred

for a minimum of 10us.

The line out socket can also be used to

connect directly to a buzzer.

Timing diagram

When a No-Go violation occurs the Go-NoGo output

will go from a low level to a high level for a minimum

of 10us.