User Manual

GDS-3000 Series User Manual

Remove all items

Press Remove All to remove all the

measurement items in full screen

mode, or to remove all the

measurement items for the active

window in split screen mode.

Gated Display All mode

Display All mode can be customized to limiting measurement to a

“gated” area between cursors. Gating is useful for measuring a

magnified waveform or when using a fast time base. The Gated

mode has three possible configurations: Off (Full Record), Screen

and Between Cursors.

Set Gating mode

1. Press the Measure key.

2. Press Gating from the bottom

menu.

3. Choose one of the gating modes

from the side menu: Off (full

record), Screen, Between Cursors

Cursors on

screen

If Between Cursors is selected, the

cursor positions can be edited by

using the cursor menu.

Page 77