User Manual

MEASUREMENT

Autoset

Background

The Autoset function automatically configures the

panel settings to position the input signal to the

best viewing condition. The GDS-3000

automatically configures the following parameters.

 Horizontal scale

 Vertical scale

 Trigger source channel

Panel operation

1. Connect the input signal to the

GDS-3000 and press the Autoset

key.

2. The waveform appears in the center of the

display.

Before

After

3. To undo Autoset, press Undo

Autoset from the bottom menu.

To remove the Undo Autoset

softkey, press any other key.

Limitation

Autoset does not work in the following situation.

 Input signal frequency is less than 20Hz

 Input signal amplitude is less than 30mV