User Manual

ManualsBrandsGW INSTEK ManualsLaboratory Test EquipmentDigital 150 MHz 4-channel 5 null 25 null 8 Bit Digital storage (DSO)

MAINTENANCE

191

8. Repeat the above step for Channel 2, 3* and 4*

when prompted.

*4 channel models.

9. When the calibration for all channels has

completed, the display goes back to the default

state.

Probe Compensation

Panel operation

1. Connect the probe between the Channel1 input

and the probe compensation output (2Vp-p,

1kHz square wave) on the front panel. Set the

probe attenuation to x10 (GDP probes are fixed

at x10).

2. Press the CH1 key to activate CH1.

3. Set the Coupling to DC from the

bottom menu.

4. Set Impedance to 1MΩ from the

bottom menu.