User Manual

ManualsBrandsGW INSTEK ManualsLaboratory Test EquipmentDigital 150 MHz 4-channel 5 null 25 null 8 Bit Digital storage (DSO)

GDS-3000 Series User Manual

190

Vertical Resolution Calibration

Panel operation

1. Press the Utility key.

2. Press System from the bottom

menu.

3. Press NEXT from the side menu.

4. Press Self Cal on the side menu.

5. A message appears to “Set CAL to CH1, then

press Self Cal”.

6. Connect the calibration signal from the rear

panel to the Channel1 input with a BNC cable.

7. Press Self Cal again after

connecting CAL to the channel 1

input.

The calibration for Channel1 starts and ends

automatically, in less than 5 minutes. A

message is displayed when the calibration

procedure has ended.